How It Works
Tetra Debris-Handling Pumps are engineered to circulate large volumes of pond water without clogging. This allows the pump to operate for long periods of time without any maintenance. Water, dirt, and debris are drawn through the quarter inch holes in the large pre-filter cage that surrounds the pump. The pre-filter cage prevents leaves, sticks, and other large debris from entering the pump. It also protects the fish from the pump’s impeller. The open-face impeller allows debris up to 1/4 in. in diameter to pass through the pump without clogging. The pond water with dirt and debris are pumped to an external filter for removal or directly to a waterfall or stream.

Flow Performance
Determine how high you waterfall will be from the pond surface. The higher the top of the waterfall is from the pond surfaces, the less flow will result. Take a look at the charts below for the approximate waterfall effect the Debris-Handling Pumps will create at various pumping heights.

Rugged Debris Handling Pump impeller can pass 1/4 in. debris without clogging
Large basket minimizes blockage and maintenance
Energy-efficient unidirectional impeller and motor
Wear-resistant and anti-corrosive ceramic shaft for longer life
Epoxy encapsulation protects motor from water intrusion
Outlet size fits tubing 1-1/2 inches or 1-1/4 inches in internal diameter
15 foot electrical cord
120 VAC, 60 Hz